Vola extension for thermostat T39EL - VR951

The Vola Extensions VR951 and VR959 are required if the flush-mounted body of the T39EL electric towel warmer is recessed too deeply into the wall or if the wall structure is thicker. They allow for precise wall adjustment and ensure that both the heating elements and the thermostat are perfectly flush with the Surface .

Overview of required Extensions

The T39EL Towel Warmer uses two different types of extensions:

VR951 – Extension for the thermostat / controller (located at the bottom of the device).

VR959 – Extension for the individual heating elements ( One extension is required per heating element, e.g. 5 heating elements = 5 Extensions )

The Special tool VR934 for disassembling and assembling the regulator Included free of charge in the delivery.

How to measure correctly

Measure the distance (X-dimension) from the finished wall covering to the front edge of the protective cap.Please ensure that the protective cap is correctly positioned to obtain an accurate result.

X-Size

Required extension

82 - 72 mm

Standard, no extension needed

72 - 62 mm

Extension VR951 +10 / VR959 +10

62 - 52 mm

VR951 extension +20 / VR959 +20

52 - 42 mm

VR951 extension +30 / VR959 +30

42 - 32 mm

Extension VR951 +40 / VR959 +40

32 - 22 mm

VR951 extension +50 / VR959 +50

Tip: Use original construction protective caps

If the original Vola protective caps are still on the flush-mounted body, the required extension length can be read directly – no further measuring is necessary.Please ensure the protective cap is correctly fitted. The length shown corresponds to the appropriate size. VR 951 + [Längenangabe] / VR 959 + [Längenangabe].

Important NOTE

Please note that Work on electrical installations must only be carried out by authorized specialists. may be carried out.