Vola extension switch - VR1400

The Vola Extensions VR1400 are used when the flush-mounted body of a fitting is installed too deep in the wall. They serve to precisely compensate for the wall structure and ensure that the visible control element is flush with the finished surface.

Compatible with the following flush-mounted bodies

400

800

2400

3400

Important: Tool required

For replacing the VR1400 diverter/switch, you need the following tool for mounting the stop pin and removing the threaded part that is set too deep: Vola drill tool set VR1410 + VR1411

How to determine the correct extension

To determine the required length, measure the distance from the tip of the flush-mounted body arrow to the finished wall surface.

Dimensions

Required extension

37 - 55 mm

Standard, no extension needed

27 - 37 mm

Extension VR1400 +10

17 - 27 mm

Extension VR1400 +20

7 - 17 mm

Extension VR1400 +30

(-3) - 7 mm

Extension VR1400 +40

(-13) - (-3) mm

Extension VR1400 +50

Tip: Use original construction protective caps

If the original Vola construction protective caps are still on the flush-mounted body, the required extension length can be read directly – no re-measuring is necessary.Please ensure that the protective cap is seated correctly. The read length corresponds to the appropriate VR 1400 + [Längenangabe].