Vola extension for heating rods T39EL - VR959

The Vola Extensions VR951 and VR959 are required when the flush-mounted body of the electric Towel Warmer T39EL is set too deep in the wall or a stronger wall structure is present. They allow for precise wall compensation and ensure that both the heating rods and the thermostat are perfectly flush with the surface.

Required Extensions at a glance

For the Towel Warmer T39EL two different types of Extensions are used:

VR951 – Extension for the thermostat / controller (located at the bottom of the device).

VR959 – Extension for the individual heating rods (One Extension is required per heating rod, e.g. 5 heating rods = 5 Extensions)

The special tool for disassembly and assembly of the controller is included free of charge in the delivery.

How to measure correctly

Measure the distance (X dimension) from the finished wall covering to the front edge of the protective cap.Please ensure that the protective cap is seated correctly to obtain an exact result.

X dimension

Required Extension

82 - 72 mm

Standard, no Extension needed

72 - 62 mm

Extension VR951 +10 / VR959 +10

62 - 52 mm

Extension VR951 +20 / VR959 +20

52 - 42 mm

Extension VR951 +30 / VR959 +30

42 - 32 mm

Extension VR951 +40 / VR959 +40

32 - 22 mm

Extension VR951 +50 / VR959 +50

Tip: Use original construction protective caps

If the original Vola construction protective caps are still on the flush-mounted body, the required Extension length can be read directly – no re-measuring is necessary.Please ensure that the protective cap is seated correctly. The read length corresponds to the appropriate VR 951 + [Längenangabe] / VR 959 + [Längenangabe].

Important note

Please note that Work on electrical installations exclusively by authorized specialists may only be carried out.